Moisture meter accessories can offer several benefits that can make moisture testing more accurate, efficient, and convenient. Here are some of the main advantages of using moisture meter accessories:
- Increased accuracy: Moisture meter accessories can help improve the accuracy of your moisture readings by providing more precise measurements in difficult-to-reach areas. For example, a moisture probe extension can help you measure moisture levels in tight spaces, while a surface temperature probe can help you account for the temperature of the material being tested.
- Greater convenience: Using moisture meter accessories can make testing more convenient and efficient, especially when working with large or complex materials. For example, a data logger can record moisture readings over time, allowing you to monitor changes and trends without having to manually take measurements.
- Improved durability: Moisture meter accessories can help protect your moisture meter from damage and wear over time. For example, a protective case can shield your meter from impacts and other hazards, while a replacement electrode can extend the lifespan of your device.
- Enhanced functionality: Moisture meter accessories can add new capabilities to your moisture meter, making it more versatile and useful for a wider range of applications. For example, a gypsum scale can help you measure the moisture content of drywall and other gypsum-based materials, while a hay probe can help you test moisture levels in baled hay.
Moisture meter and damp meter accessories to protect, enhance and preserve your moisture meter. We have searched all avenues to find the Protimeter and Tramex moisture meter accessories currently available online. This content will continue to be updated.
Refurbinators picks out restoration equipment, tools and sundries items that we think are the best and most exciting, based on independent research and careful consideration. On some occasions we earn revenue if you click the links and buy the products. But this doesn’t affect what we choose to highlight and we will never let it bias our coverage.
Jump to:-
Protimeter Moisture meter accessories
Protimeter ReachMaster Pro BLD5777
The Protimeter ReachMaster Pro is a telescoping non-invasive moisture meter built for swift assessment of internal moisture conditions. Whereas usual moisture surveys can increase inspection time up to 60%, the ReachMaster Pro dramatically reduces this time via its ability to access hard to reach areas, adjustable sensitivity and an unrivalled depth of measurement.
Click here for our full Blog on the Protimeter ReachMaster Pro
Wide Array Of Features
Significantly quicker than handheld meters, the Protimeter ReachMaster Pro provides an abundance of features designed to aid building professionals:
- Adjustable telescopic handle ranges from 69 to 114cm (27” to 48”)
- Wireless communication from sensor head to display
- Measurement depth up to 12cm depending on test material
- Not adversely affected by surface moisture
- Sensitivity adjustment
- Simple field recalibration
- Auto shut-off
- Audible alarm
- Tilt-able colour display with green, yellow & red zones
- Menu programmed with multiple languages
- Replaceable sensor wear plate with wear indicator on abrasion plate (including 1 spare)
- 80 hour battery life (4 x AA, 2 x AA in sensor)
- Upgradable firmware to match new features
Replacement Pin Needles
Part number – BLD0500
Fits all Protimeter pin type meters
Includes 2 x 1″ (22mm) needles
Calcheck device
Part number – BLD5086
Verify pin function readings between 17 and 19%. Includes 2 x 1″ (22mm) needles
Two Pin Moisture Probe
Part number – BLD5079
Standard moisture probe, fits all Protimeter pin type meters
Heavy Duty Moisture Probe
Part number – BLD5060
Heavy duty two pin moisture probe, fits all Protimeter pin type meters
Deep Wall Probes – 5″ (130mm)
Part number – BLD5018
Measure moisture at depth in walls and other structures
Deep Wall Probes – 9″ (240mm)
Part number – BLD5020
Measure moisture at depth in walls and other structures
Surface Temperature Sensor
Part number – BLD5804
For the Protimeter MMS
Range 32-122 deg F (0-50 deg C)
Surface Temperature Probe
Part number – BLD5808
For the Protimeter Hyromaster, MMS2, Pysclone
Range 32-122 deg F (0-50 deg C)
Surface Temperature Sensor
Part number – BLD5059
For Protimeter Timbermaster
Automatically corrects the moisture value
Hygrostick – Single
Part number – POL4750
Replacement hygrostick Range 30 – 100% RH
Hygrostick – Pack 5
Part number – BLD4750C
Replacement hygrostick Range 30 – 100% RH
QuickStick – Single
Part number – POL8750
Replacement quikstick Range 0 – 100% RH
MMS (firmware 3.15 or higher)
Hygromaster (firmware 5.22 or higher)
Hygrostick Extension Lead
Part number – BLD5802
800mm (30″) long extension lead for hygrostick and quikstick
Humidity Sleeves
Part number – BLD4902
Pack of 20 humidity sleeves
(43mm long x 16mm diameter)
Humidity Box
Part number – BLD4711
Allows surface %RH humidity test on concrete slabs
Hammer Electrode Needles for BLD5055
Part number – BLD05296
Replacement pin needles for the heavy duty hammer electrode. Pack of 10
Hammer Electrode
Part number – BLD5000
A standard hammer electrobe for measuring sub-surface moisture levels in wood
Heavy Duty Hammer Electrode
Part number – BLD5055
Heavy duty metal construction for measuring sub-surface moisture levels in wood
Hammer Electrode Needles for BLD5000
Part number – BLD0529
Replacement pin needles for the hammer electrode. Pack of 10
Tramex Accessories
MRHIII Calibration Check Box
Calibration check box for Tramex MRHIII (MRH3) Moisture and Humidity Meter
This is a calibration check box for checking the Tramex Moisture Meter MRHIII ( Moisture & Humidity Meter)
MEP Calibration Check Box
Calbration Check Box for Tramex MEP ( Moisture Encounter Plus )
This is a calibration check box for checking the Tramex Moisture Meter MEP ( Moisture Encounter Plus )
Calibration Plate for CME4 and CMEX2
Calibration check plate for CME4 and CMEX2 moisture meters
This Calibration check plate is used for checking readings on the following Tramex non-destructive impedance type moisture meters.
- Concrete Encounter (CME4)
- CMEXpert
Moisture Encounter 5 Calibration Check Box
Calibration Check Box for Moisture Encounter 5 – ME5. The calibration check box allows for regular on-site calibration checks.
Place the ME5 in the correct orientation with the electrodes in position.
Lightly compress the meter as when taking a reading.
1. Wood – Timber: 19.0%. ±1.0%
2. Shallow Depth: 14.0% ±1.0%
3. Drywall – Roofing: 22.0%. ±1.0%
4. Plaster – Tile. : 9.0% ±1.0%
The Extension Handle
The extension handle can be used with the ME5, CME5, CMEX5 and Skipper 5 Moisture Meters. It is a useful accessory for measuring in out of reach, high places. It can also be used for taking readings on the floor and thus reduces the need for crouching or kneeling.
Accessory Pack For Concrete Moisture Meters CME5 And CMEX5
The Accessory Pack for the Concrete Moisture Encounter 5 – CME5 and Concrete Moisture Encounter X5 – CMEX5 consists of a Calibration Check Plate, an extension handle and a handy holster pouch.
Minimum Handle Extension: 12″ (30cm)
Maximum Handle Extension: 32″ (80cm)
Accessory Pack For Moisture Encounter 5
The Accessory Pack for the Moisture Encounter 5 – ME5 consists of a Calibration Check Plate, an extension handle and a handy holster pouch for the ME5 moisture meter.
HYGRO-I PROBES
The Hygro-i probe provides measurements of humidity, temperature and dew-point in structural materials such as concrete flooring, walls.
HYGRO-I Insertion/Retrieval Tool
The HIEX Tramex Hygro-i insertion/retrieval tool is for use with the Hygro-i RH probes and sleeves.
RH Hole Liner Sleeves with Stops
Hole Liners used with Tramex Hygro-i relative humidity probes.
Requires 16mm Drill Bit
Set of 3 Calibration Check Plugs
Set of 3 calibration check plugs for Professional & Compact resistance meters
Hand Held Electrode (cable and 200mm pins)
Heavy-Duty Electrode with Cable and 200mm Long Pins for use with CMEX2, MRH3 & PTM.
Hammer Electrodes(with cable and pins)
Hammer action pin probe
Hammer-action pin-type electrode (With Cable And Pins) for use with CMEX II, MRH III
Insulated Pins
Insulated Pins in 3 size options
- Insulated 1.5″ (10 per pack)
- Insulated 3″ (1 pair)
- Insulated 7″ (1 pair)
Electrodes and Pins for use with Professional and Compact Moisture Meters and the Flooring Inspection Kit
Handheld Electrode(with cable and pins)
Pin Type Wood probe
Hand held heavy-duty Pin-type Wood Probe with Cable and Pins for use with CMEX2, MRH3
Reusable In-Situ Concrete RH Sensor for Concrete RH Testing
The Tramex Hygro-i2 ® relative humidity probe is the most advanced, resilient and reusable RH probe on the market today, allowing the user to perform in situ and hood type RH testing to comply with BS 8201, 8203, 5325 and ASTM F2170 for the flooring industry, and is ideal for use by Flood & Water Damage Restoration and Indoor Air Quality professionals.
The speed and accuracy of the Tramex Hygro-i2® probes set them apart from all other RH probes on the market. The confidence in knowing you are testing with the best and fastest RH probe, together with the complete Tramex concrete moisture testing system, brings reliability and peace of mind to a whole new level. Please note that the RHIE2 Electronic Interface Cable is needed to connect the Hygro-i2 Probe.
Electronic Interface Cable for Tramex Hygro-i Probes
The RHIE2 Electronic Interface cable connects the Hygro-i® & Hygro-i2® RH probes to CMEX2 & MRH3 non-destructive moisture meters
The RHIE2B Electronic Interface cable connects the Hygro-i® & Hygro-i2® RH probes to the #Feedback Datalogger DL-RHTX and the CMEX5
The Hygro probe provides measurements of humidity, temperature and dew-point in structural materials such as concrete flooring and walls as well as the environmental conditions within the building structure allowing the user to perform in-situ & hood type RH testing to comply with ASTM F2170 & BS 8201,8203, 5325.
Tramex Insulated RH Hood For Surface RH Testing
Non-destructive Relative Humidity testing of concrete and other floors and screeds, the Tramex Hygrohood is an insulated relative humidity hood used in conjunction with the CMEX5, CMEX2 or the MRH3, together with Hygro-i2 ® RH probes.
Tramex Phono To Bayonet Adaptor
Adapter for wood pin probes with phono-type connection (used previously with CMEX2 and MRH3) to be used with the latest CMEX5 moisture meter.
The Concrete Moisture Probe
The Concrete Moisture Probe , measures the in-situ moisture content within a concrete floor or slab. This Concrete Moisture Probe is used with a concrete moisture meter from the Tramex Concrete Moisture Encounter range, the CME5, CMEX5 as well as previous versions of Tramex Concrete Moisture Meters, the CME4 and CMEX2.
The Concrete Moisture Probe provides in-situ Moisture Content readings in a Tramex Unified Concrete Moisture Test Method – quantitative Moisture Content measurements are taken in both the top ¾ inch layer and within the body of concrete floors and slabs down to an extendable depth of up to 4″ (100mm) and a Diameter 3/4” (19mm).
The Determinator helps determine if moisture within the concrete slab is originating from below, within or above the slab. This information can be essential in establishing the next step in fixing moisture problems in a concrete slab.
The Concrete Moisture Probe can only be used with a Tramex Concrete Moisture Meters. It does not work alone. The Determinator is supplied in a Tramex hard case with allocated space for your Concrete Moisture Meter.
The Determinator is also available as part of the following kits:
- The #Concrete Determinator Tech Kit, which includes the CMEX5 Concrete Moisture Meter for non-destructive quantitative testing of concrete and comparative testing per ASTM F2659.
- The #Concrete Determinator Tech Kit is the complete kit for instant and precise testing of both Surface and In-Body Concrete Moisture Content in floors and slabs using a unified gravimetric-based testing method. It includes the CMEX5 digital concrete moisture meter, the reusable Concrete Moisture Probe, a reusable plug-in Hygro-i2 ® RH probe for in-situ testing of concrete as per ASTM F2170, an infrared surface thermometer for surface temperature and dew point conditions when used in conjunction with the CMEX5 hygrometer and the CMEX5 extension handle.
